diff --git a/docs/common/orion-common/low-level-dev/_bios.mdx b/docs/common/orion-common/low-level-dev/_bios.mdx
index 1c218a702..aa6e25a67 100644
--- a/docs/common/orion-common/low-level-dev/_bios.mdx
+++ b/docs/common/orion-common/low-level-dev/_bios.mdx
@@ -301,11 +301,11 @@ BIOS 芯片工作电压 1.8 V，连接前必须确认 CH347T 输出为 1.8 V；
   >
     将 SOP8 208mil 烧录针连接 CH347T 烧录器和 BIOS 芯片，将 SOP8 208mil 烧录针的引脚 1 和 CH347T 烧录器的引脚 1 对齐安装，将 SOP8 208mil 烧录针的针头引脚 1 和 BIOS 芯片的引脚 1 对准并适当按压使之接触紧密。
 
-    :::tip
+:::tip
 
-    烧录器和烧录针一般会使用圆圈或者三角形标注引脚 1，主板使用三角形标注 BIOS 芯片的引脚 1。
+烧录器和烧录针一般会使用圆圈或者三角形标注引脚 1，主板使用三角形标注 BIOS 芯片的引脚 1。
 
-    :::
+:::
 
     <div style={{ textAlign: "center" }}>
       <img
@@ -320,6 +320,7 @@ BIOS 芯片工作电压 1.8 V，连接前必须确认 CH347T 输出为 1.8 V；
         style={{ width: "100%", maxWidth: "1200px" }}
       />
     </div>
+
   </TabItem>
 </Tabs>
 
diff --git a/i18n/en/docusaurus-plugin-content-docs/current/common/orion-common/low-level-dev/_bios.mdx b/i18n/en/docusaurus-plugin-content-docs/current/common/orion-common/low-level-dev/_bios.mdx
index 2c322710b..1359c6404 100644
--- a/i18n/en/docusaurus-plugin-content-docs/current/common/orion-common/low-level-dev/_bios.mdx
+++ b/i18n/en/docusaurus-plugin-content-docs/current/common/orion-common/low-level-dev/_bios.mdx
@@ -301,11 +301,11 @@ The BIOS chip operates at 1.8 V. Make sure the CH347T output is set to 1.8 V bef
   >
     Connect the SOP8 208mil programming pins to the CH347T programmer and the BIOS chip. Align pin 1 of the SOP8 208mil programming pins with pin 1 of the CH347T programmer, then align pin 1 of the programming pins tip with pin 1 of the BIOS chip and press gently to ensure firm contact.
 
-    :::tip
+:::tip
 
-    Programmers and programming pins usually mark pin 1 with a circle or triangle, and the board marks pin 1 of the BIOS chip with a triangle.
+Programmers and programming pins usually mark pin 1 with a circle or triangle, and the board marks pin 1 of the BIOS chip with a triangle.
 
-    :::
+:::
 
     <div style={{ textAlign: "center" }}>
       <img
@@ -320,6 +320,7 @@ The BIOS chip operates at 1.8 V. Make sure the CH347T output is set to 1.8 V bef
         style={{ width: "100%", maxWidth: "1200px" }}
       />
     </div>
+
   </TabItem>
 </Tabs>