Repository navigation
Conversation
VerdaccioRegistry.createTestDir() deleted the htpasswd file and forgot the users the file had generated. Verdaccio checks every authenticated request against that file, so a call from one test logged out every other test that was running at the same time. The registry already starts with a fresh htpasswd in start() and removes it in stop(), and no test file creates the same user twice, so the per-call reset is not needed.
Contributor
|
No actionable comments were generated in the recent review. 🎉 ℹ️ Recent review info⚙️ Run configurationConfiguration used: Path: .coderabbit.yaml Review profile: ASSERTIVE Plan: Pro Run ID: 📒 Files selected for processing (1)
Included review availability: Your plan provides up to 5 included reviews per hour; 0 remain after this review. WalkthroughThe test harness now clears tracked registry users during ChangesRegistry test harness reset
Suggested reviewers: 🚥 Pre-merge checks | ✅ 4✅ Passed checks (4 passed)
Comment |
Collaborator
Author
|
Status: ready for review. This is the prerequisite for #40198, which is rebased on it. Verified with the debug build: |
![claude[bot]](https://avatars.githubusercontent.com/in/1236702?s=60&v=4){kind=small}
Contributor
There was a problem hiding this comment.
LGTM — test-harness-only change that stops createTestDir() from wiping the shared htpasswd mid-file.
What was reviewed:
- Verified every
generateUser/authBunfigcaller (bun-publish, bun-install-registry, npmrc, config-precedence) uses a unique username within its file, so the duplicate guard ingenerateUser()still cannot fire now thatthis.usersaccumulates. start()still deletes htpasswd and now also clearsthis.users, so per-file state remains fresh;stop()unchanged.bun-install-registry.test.ts's ownbeforeEachrm targetsimport.meta.dir/htpasswd(a different path), but that file only creates one user (whoami) so it is unaffected either way.
Extended reasoning...
Overview
This PR moves two lines inside VerdaccioRegistry in test/harness.ts: the htpasswd delete and this.users = {} reset move out of createTestDir() (called per-test) and the map reset is added to start() (called once per file). Net effect: authenticated users created earlier in a test file are no longer invalidated when a later test in the same file calls createTestDir(). No production code is touched.
Security risks
None. This is test infrastructure controlling a local verdaccio registry's user file. No auth, crypto, or runtime code paths are involved.
Level of scrutiny
Low. Three-line net change to a test helper, with clear rationale (unblocking concurrent auth-bearing verdaccio tests). The only correctness question is whether any test file relied on the per-test reset — i.e., whether any file creates the same username twice.
Other factors
I grepped every generateUser/authBunfig call site. All usernames are unique within each file (bun-publish.test.ts, bun-install-registry.test.ts, npmrc.test.ts, config-precedence.test.ts), so the if (this.users[username]) throw guard cannot newly fire. The pre-existing cross-file htpasswd sharing (which config-precedence.test.ts already works around with its own config dir) is untouched by this change — start()/stop() still delete the file. The PR description's claim about bun-install-registry.test.ts's own beforeEach deleting htpasswd is slightly off (it targets test/cli/install/htpasswd, not test/cli/install/registry/htpasswd), but that file only creates a single whoami user so the reset was never load-bearing there anyway. The author reports the affected test files pass; the change is strictly less destructive than before.
dylan-conway
added a commit
that referenced
this pull request
Oct 13, 2026
### Problem
- The install tests fork verdaccio 6 and assert its answers where npm
differs. `/-/whoami` with an unknown token: verdaccio `200 {}`, npm `401
{}`.
- All 31 files share one `htpasswd` and one storage directory. When
verdaccio cannot listen on its random port, `start()` never settles: 6
of 155 local file runs, and main build 124221.
### Fix
- `test/packages/registry` is an npm registry on `Bun.serve`, without
dependencies. Its state is in memory, per instance.
- The 31 files import `TestRegistry` from `"registry"`.
`VerdaccioRegistry` and the verdaccio dependencies are removed, and
three packages that only verdaccio installed leave the bytecode snapshot
of `libraries.js`.
- `yarn-berry.test.ts` came to main with #40057, after the rebase. It is
migrated too (7025402), so 32 files use `TestRegistry`. Each number
for 31 files is from before that.
- Verified: `test/packages/registry/` (183 tests) and the 31 files (2518
pass, 0 fail).
### Test timings
| 31 files | main, verdaccio | this PR |
|---|---|---|
| local, wall-clock | 158 s | 83 s |
| local, CPU | 214 s | 113 s |
| CI, six lanes | 985 to 1090 s | 549 s |
Same base commit. Details: Notes.
### Background
- #33115 has the same goal. A maintainer has to choose.
- Reads follow registry.npmjs.org: 49 of 63 compared requests agree.
Writes follow the npm docs.
- Considered a class in `harness.ts`: every test file would load it.
### Downsides
- The registry is faster, so packuments arrive in another order. One
test depended on that (54 of 100 local runs failed) and orders them now.
- The registry runs on the test thread: a `spawnSync` of bun against it
never returns.
<details><summary>Notes</summary>
#### What I ran
After the rebase. The head is 9e9e394 on main c6da4a4. Linux x64,
12 vCPU. bun is the canary build e555359, which is 8 commits behind
that main commit.
| what | result |
|---|---|
| the 31 migrated files, 5 rounds, head 2d236bf | 154 of 155 file
runs passed: 2518 pass and 3 skip in a round. One run had one failing
test, which the commit after it repairs |
| the 31 files, 5 more passes and 5 runs in a row of each file, head
9e9e394 | 310 file runs, 0 fail |
| the same 31 files on main with verdaccio, 5 rounds | 2516 pass, 0
fail, 3 skip. 6 of 155 file runs did not start verdaccio |
| `test/packages/registry/` | 183 pass |
| `bundler_bytecode_portable.test.ts` | 22 pass |
| `tsc --noEmit` in `test/` | 7 errors on main, the same 7 on this
branch, none in a file of this PR |
| CI, build https://buildkite.com/bun/bun/builds/124229, head 2d236bf
| 183 of 183 jobs passed |
- The two tests that only this PR has are the difference between 2516
and 2518: the `whoami` test and the test of the publish header.
- The runs are after a clean install of `test/node_modules` from the
lockfile of each tree.
- The canary build passes the bytecode test of main on the tree of main.
So its bytecode is the bytecode of main.
- I did not run Windows or macOS after the rebase. The Windows machine
was not available. CI ran both.
- Build 124229 has one test of this PR that passed on a retry: see the
flaky tests below.
After the merge of main 110efa0 (d947d38) and the migration of
`yarn-berry.test.ts` (7025402). Linux x64. bun is `bun-linux-x64` of
main build 124948, which is 110efa0:
| what | result |
|---|---|
| `yarn-berry.test.ts` on d947d38 | does not load: `Export named
'VerdaccioRegistry' not found` |
| `yarn-berry.test.ts` on 7025402 | 58 pass, 0 fail |
| the same file, 40 runs in a row, then 5 rounds of 8 runs at the same
time | 80 runs, 0 fail |
| the same file with a registry that has no packages | 21 of 58 fail, so
the tests do read the registry |
| `bundler_bytecode_portable.test.ts` | 22 pass |
| `test/packages/registry/` | 183 pass |
- None of the inputs of the bytecode snapshot changed between c6da4a4
and 110efa0, so its values stay.
- The other 31 files were not run again after the merge. CI runs them.
Before the rebase, on the head a4367e5 (then 3b5d5ee):
- CI build https://buildkite.com/bun/bun/builds/121299 passed 181 of 181
jobs.
- Windows x64, canary a4f1429: `test/packages/registry/` had 183 pass.
`bun-publish`, `config-precedence`, `pnpm-lock-v9` and
`bun-update-lockfile-sync` had 258 pass, 0 fail, 1 skip, three commits
earlier.
- A local debug build with ASAN: `test/packages/registry/`, `hoist`,
`npmrc`, `config-precedence`, `bun-publish` and `bun-lockb` had 319
pass, 0 fail, when the package had 165 tests.
- With the leftovers of verdaccio in the fixture directory, the 31 files
had 2499 pass and 1 fail. The failure was `npm manifest cache entries
are only reused for the package name they were saved for`, which is
flaky on main too.
#### The rebase
- The base moved from a4f1429 to c6da4a4, 88 commits. The merge
commit is gone. The 12 commits were replayed, so each has a new id.
- 7 files had a conflict. In 5 of them #44614 changed a line that this
PR deletes or renames. `test/package.json` is the file of main without
the two verdaccio lines.
- `test/bun.lock` is the lockfile of main after `bun install
--lockfile-only` without verdaccio. Its diff has the same 578 lines as
before the rebase.
- After the replay, 42 of the 59 files had the same bytes as before the
rebase. For the other 17, the patch of this PR had the same lines, apart
from lines of main that it deletes and the snapshot.
- The snapshot of `libraries.js` has new values, because main has a new
WebKit: see the bytecode snapshot below.
- Two commits are new. 2d236bf: main changed bun-types and
`test/tsconfig.json` (#44614). With them, four lines of the package had
a type error. `request.bytes()` and `request.clone()` have the types of
undici there, and `BodyInit` is `Bun.BodyInit`.
- 9e9e394: see "A test that depended on the order of two packuments".
#### This PR and #33115
#33115 replaces verdaccio too. I did not find it before I opened this
PR: my search for open pull requests stopped at 20 results. Both PRs
change the same test files, so only one can land as it is. The author of
#33115 compared them in
#33115 (comment).
| | #33115 | this PR |
|---|---|---|
| Files | 1083 | 59 |
| State | conflicts with main, four review passes | applies to main |
| Fixtures | converted to source directories | as they are on main |
| The two mock registries (`dummy.registry.ts`,
`simple-dummy-registry.ts`) | replaced | not touched |
A maintainer has to choose. If this PR lands, #33115 can be closed, or
reduced to the parts that only it has.
**Rulings of the review of #33115 that this PR follows**
- A publish is refused with 415 unless the Content-Type is
`application/json`, character for character. `bun-publish.test.ts`
asserts the header that bun sends. The two comments in
`src/runtime/cli/publish_command.rs` stay as they are.
- An error that a handler throws fails the test: `stop()` throws it.
- The bulk advisory endpoint reads a gzip body, and a test sends one.
- `createTestDir()` does not remove users or tokens.
- `hasInstallScript` is true for a script that is not empty.
- `time.modified` moves on each write.
- A field of an advisory that is passed as undefined keeps its default.
The test compares with literal values.
- Nothing here says that bun reads `Cache-Control`. The registry sends
the header because npm does.
**What only #33115 has**
- The replacement of `dummy.registry.ts` and `simple-dummy-registry.ts`.
18 test files import them.
- `registry.define()`: a package that a test declares in code, with a
tarball writer and its golden files.
- The conversion of the fixtures to source directories.
- `registry-resolver-matrix.test.ts`.
Each of these can go on top of this registry as a PR of its own. So can
the three servers in `bun-audit.test.ts`, `config-precedence.test.ts`
and `bun-install-lifecycle-scripts.test.ts` that forward to the registry
to see or to change a request: `intercept` and `recordRequests` do that
now.
#### How each behaviour was established
**Compared with registry.npmjs.org, GET and HEAD only**
I sent 63 requests to registry.npmjs.org and to this registry with
copies of `is-number` and `@types/is-number`, and compared the status,
nine headers and the body. 49 agree. The requests cover:
- The packument in both forms, `HEAD`, `Range`, `?write=true`, and a
scoped name as `@s%2fn`, `@s/n` and `%40s%2fn`.
- A version by number and by tag, and one that is not there: 404 with
the JSON string `"version not found: 9.9.9"`.
- A tarball: `GET`, `HEAD`, `Range` with 206 and 416, `If-None-Match`,
and the 404 for the scope in the file name.
- `dist-tags`, `collaborators`, `visibility`, `ping`, `whoami`, the
account endpoints, `/-/v1/done`.
- The same endpoints with a token that npm does not know.
Separate probes gave:
- The abbreviated version is an allow list without `libc`,
`description`, `scripts` and `time`. `hasInstallScript` is there only
when true. The census covered 5763 versions of 9 packages.
- `Accept`: the registry looks for the media type anywhere in the
header, in exact case. It does not weigh q.
- The entity tag is the hex md5 of the body. It is weak on an encoded
answer. `If-Modified-Since` has no effect.
- Encoding: brotli when accepted, else gzip. Bodies of 21 and 26 bytes
came back as they are, a body of 63 bytes came back encoded. The
registry here starts at 48 bytes.
- `Last-Modified` is `modified` rounded up to the second. I checked one
packument.
- `You must be logged in to publish packages.` is the text of npm for a
token that it does not know, on `collaborators`.
**The 14 requests that differ**
| request | npm | this registry |
|---|---|---|
| a version, and search (4 requests) | the headers change between a
first and a later request: `public`, `last-modified` and `accept-ranges`
come and go | always `cache-control: max-age=300` |
| a packument or tarball that is not there (3) | `cache-control: public,
max-age=300` for an unscoped name, nothing for a scoped one | no
`cache-control` |
| `collaborators` | names in another order | the order of `maintainers`
|
| `/-/npm/v1/keys` | the keys of npm | `{"keys":[]}`, it does not sign |
| `/-/nonexistent-endpoint`, `/-/v1/login/cli/<id>` | 405 with `allow` |
404 `ResourceNotFound` |
| `/<name>/-rev/<rev>` with GET | `allow: PUT` | `allow: PUT, DELETE` |
| `?write=true` with the abbreviated `Accept` | `content-type:
text/plain` | `application/json` |
| `/login/cli/<id>` | 404, the page is on the website | stands in for
that page |
**From the npm/registry docs and the npm CLI source, not sent to the
live registry**
- Login with `PUT /-/user/org.couchdb.user:<name>`: 201 and `{ok, id,
rev, token}`, or 401 and `{"ok":false}`.
- Tokens and profile under `/-/npm/v1/`.
- The publish document, `www-authenticate: OTP`, the web flow with
`authUrl` and `doneUrl`, 202 with `retry-after`.
- The one-time password message. bun compares against this exact text.
- The request sequences of deprecate, unpublish, owner and dist-tag.
- The bulk advisory request and answer.
**My wording, because I do not know the text of the registry**
- Each `400 Bad Request: ...` for a publish body that fails a check, the
415, and the 403 for a read-only token.
- `409 Document update conflict.` is the text of CouchDB.
- Publish answers `200 {"ok":true,"id","rev"}` and a dist-tag write
answers `{"ok":"dist-tags updated"}`. I recall both from npm output. I
did not verify them.
- A restricted package answers 404 to a client that cannot read it. I
recall this from npm. I could not probe it, because I know no private
package.
- `You cannot publish over the previously published versions`, `You do
not have permission to publish` and `cannot be republished until 24
hours have passed` are the texts of npm as I recall them. I did not
probe them.
- A publish with a token that the registry does not know answers 401
without `www-authenticate`. npm sends `www-authenticate: Basic, Bearer`
on `collaborators`. I do not know what it sends on a publish.
#### Where the registry is more permissive than npm
- Every user can publish into every scope. npm needs a user or an org
with the name of the scope.
- A restricted package needs no paid plan. npm answers 402.
- A package of the storage directory has no maintainers, so every user
can add a version to it.
Not implemented: signatures, provenance, OIDC, orgs and teams.
#### What the tests saw change
Two tests of the 31 files depended on verdaccio. `whoami > invalid
token` asserted its answer, `200 {}`. It asserts `401 Unauthorized` now,
and a new test keeps the `200 {}` case with a mock server. `ranged peer
dependency resolution is stable across installs from bun.lock` depended
on its speed: see the section on the order of two packuments. Every
other test passes unchanged.
`bun-publish.test.ts`:
- Each `rm` of a package directory is a `registry.packages.delete()` of
that name. The next section has the reason.
- `--ignore-scripts` published `publish-pkg-4` and removed
`publish-pkg-5`. It passed only because the test before it removed
`publish-pkg-4`. It removes the right package now.
- `republishing normally fails` matched `/403|409|already exists|already
present|cannot publish/`. It asserts the status and the message.
- A new test asserts that the publish request has `content-type:
application/json`.
`harness.ts` does not export `VerdaccioRegistry`. `REVIEW.md` says to
delete code in the PR that makes it dead. The eight files that had a
variable `verdaccio` keep that name, so their diff stays small.
A bug of the registry that the review found: `bun publish` of a version
with build metadata got a 400. bun sends the key `1.0.0` and a manifest
with `1.0.0+build.5`. The registry accepts that now, and `cli.test.ts`
publishes one with bun.
#### A checkout that ran the tests on verdaccio
Verdaccio wrote each package that a test published into
`test/cli/install/registry/packages`. That is the fixture directory too,
and ignore rules hide what verdaccio wrote. One run of the 31 files on
main left 18 packages and `.verdaccio-db.json` there.
The new registry reads that directory. So it served those packages, and
a publish of the same version got `403 You cannot publish over the
previously published versions`. With the leftovers of that run in place,
15 of the 47 tests of `bun-publish.test.ts` failed.
- `bun-publish.test.ts` calls `registry.packages.delete()` in the 26
places where main removes a package directory. With the same leftovers
in place the file passes.
- The ignore rules stay as they are on main, so the leftovers stay out
of `git status`.
- The builds of this PR did not show this: a checkout of CI has no
leftovers.
#### Layout
The package has the layout of `test/packages/s3-server`, which came to
main while this PR was open: the sources in `src/`, the tests in
`test/`, and the helpers of the tests in `test/helpers.ts`. `index.ts`
does not import the harness. `test-registry.ts` has the class for the
tests of bun, and the alias `"registry"` points to it.
#### One port, one registry
`Bun.serve` sets `SO_REUSEPORT` when it gets `development: false`
(`src/runtime/server/ServerConfig.rs:716`). The registry passed that
option, so a second registry on the same explicit port started with no
error. It passes `reusePort: false` now, and the second one fails with
`EADDRINUSE`. The new test fails without the option.
The tests listen on port 0. On Linux, 20000 listeners on port 0 with
`SO_REUSEPORT` got 20000 distinct ports, so I have no sign that a test
shared a port. I did not check that on macOS or Windows.
#### The bytecode snapshot
`bundler_bytecode_portable.test.ts` pins the bytecode of a bundle of 64
libraries from `test/node_modules`. The bundle holds each package that a
library can load, also one that it loads in a `try` block and does not
declare.
`test/` uses the isolated linker. A package that is not declared is
still found through `node_modules/.bun/node_modules`, which has one
version of each installed package. Two libraries of the bundle load a
package that way:
| library | loads | with verdaccio | without |
|---|---|---|---|
| `mongodb` (`lib/deps.js`) | `aws4` | `aws4@1.13.0`, installed only for
`@cypress/request`, a dependency of verdaccio | not found, so not in the
bundle |
| `follow-redirects` (`debug.js`) | `debug`, an optional peer |
`debug@4.3.4` with `ms@2.1.2`. Only `@verdaccio/config` and
`@verdaccio/local-storage-legacy` resolve to that version |
`debug@4.4.0`, which `superagent` and others already bring |
So 7 modules of 3 packages leave the bundle: `aws4@1.13.0`,
`debug@4.3.4` and `ms@2.1.2`. Nothing is added. To check this, the
lockfile of c6da4a4 and the lockfile of this PR were installed in two
directories, and `libraries.js` was built in each with the command of
the test. The sha256 of the two `.js` outputs are the old and the new
value of the snapshot. A metafile names the two importers above.
The bytecode is 32632 bytes smaller: 21179744, where main has 21212376.
Before the rebase the two numbers were 21174272 and 21206912, with the
WebKit of that time. The new values are the same on every platform,
which is the case where the comment at the top of that file says to
update the snapshot.
#### Test timings
"Before" is main at c6da4a4, where the 31 files fork verdaccio.
"After" is this PR on the same commit.
**Local**
- Linux x64 VM, 12 vCPU (Intel Xeon, 2.90 GHz), 16 GB. bun is the canary
build e555359 for both sides.
- Each file ran alone: `bun test --timeout=90000 <file>`. The two trees
took turns on each file. The order of the two changed with each file and
each round. 5 rounds, 310 file runs.
- Wall-clock is from the start of `bun test` to its exit. CPU is the
user and system time of all processes of the VM in that time, from the
cgroup. It has the verdaccio process, which the test does not wait for.
- The table has the median of the runs that exited with 0, and the
lowest and the highest in brackets. Seconds.
- The after side is the commit 2d236bf. The commit after it changes
one test of `isolated-install.test.ts` and adds no wait for time.
- The VM lost CPU time to other VMs in each round (steal time), so the
wall-clock has noise. The rounds agree: before is 1.7 to 2.1 times after
in each one.
| file | tests | before, wall | after, wall | ratio | before, CPU |
after, CPU |
|---|---|---|---|---|---|---|
| `bun-add-catalog.test.ts` | 149 | 4.81 (4.34 to 6.17) | 2.15 (1.88 to
3.47) | 2.2 | 6.94 | 3.16 |
| `bun-add-filter.test.ts` | 123 | 4.67 (3.81 to 7.01) | 1.91 (1.84 to
2.19) | 2.4 | 6.75 | 3.10 |
| `bun-audit.test.ts` | 182 | 6.79 (6.43 to 9.03) | 5.21 (4.62 to 5.39)
| 1.3 | 10.43 | 6.83 |
| `bun-dedupe.test.ts` | 82 | 4.31 (4.10 to 4.74) | 2.19 (1.99 to 2.37)
| 2.0 | 6.96 | 3.61 |
| `bun-install-lifecycle-scripts.test.ts` | 128 | 10.40 (8.70 to 14.14)
| 8.51 (7.50 to 9.92) | 1.2 | 21.07 | 16.04 |
| `bun-install-native-binlink.test.ts` | 16 | 3.93 (3.71 to 6.41) | 1.79
(1.40 to 5.45) | 2.2 | 5.40 | 3.04 |
| `bun-install-patch.test.ts` | 31 | 3.93 (3.77 to 4.66) | 2.52 (2.04 to
2.88) | 1.6 | 4.15 | 2.09 |
| `bun-install-registry.test.ts` | 282 | 18.79 (16.54 to 26.41) | 15.38
(10.74 to 16.10) | 1.2 | 18.89 | 12.45 |
| `bun-lock.test.ts` | 40 | 3.98 (3.40 to 4.51) | 1.33 (1.27 to 1.59) |
3.0 | 4.48 | 1.61 |
| `bun-lockb.test.ts` | 8 | 2.29 (1.90 to 2.39) | 0.53 (0.43 to 0.64) |
4.3 | 2.45 | 0.52 |
| `bun-patch.test.ts` | 37 | 4.16 (4.05 to 6.92) | 3.10 (2.44 to 3.78) |
1.3 | 5.02 | 3.18 |
| `bun-pm-licenses.test.ts` | 80 | 5.16 (3.53 to 5.78) | 2.19 (1.53 to
2.36) | 2.4 | 6.61 | 2.91 |
| `bun-prune.test.ts` | 121 | 5.40 (5.14 to 5.63) | 2.80 (2.62 to 3.46)
| 1.9 | 8.18 | 4.38 |
| `bun-publish.test.ts` | 47 | 5.40 (5.03 to 6.02) | 2.30 (2.00 to 3.30)
| 2.3 | 5.42 | 2.15 |
| `bun-update-lockfile-sync.test.ts` | 77 | 4.22 (3.39 to 4.68) | 1.78
(1.52 to 2.15) | 2.4 | 5.95 | 2.78 |
| `bun-update-transitive.test.ts` | 224 | 8.46 (7.73 to 10.16) | 5.06
(4.44 to 8.29) | 1.7 | 13.50 | 8.56 |
| `bun-update.test.ts` | 159 | 8.28 (7.66 to 8.69) | 4.59 (4.27 to 5.02)
| 1.8 | 11.96 | 6.73 |
| `bun-workspaces.test.ts` | 82 | 3.56 (3.22 to 3.75) | 1.59 (1.48 to
1.77) | 2.2 | 4.85 | 2.42 |
| `catalogs.test.ts` | 89 | 5.90 (4.93 to 6.02) | 2.04 (2.00 to 2.20) |
2.9 | 7.00 | 3.28 |
| `config-precedence.test.ts` | 51 | 3.65 (2.81 to 4.11) | 0.90 (0.74 to
0.97) | 4.1 | 4.46 | 1.12 |
| `frozen-lockfile-missing-workspace.test.ts` | 1 | 1.79 (1.64 to 2.12)
| 0.15 (0.14 to 0.18) | 11.9 | 2.02 | 0.18 |
| `frozen-lockfile-pruned.test.ts` | 101 | 4.76 (4.05 to 5.96) | 1.83
(1.71 to 1.95) | 2.6 | 7.05 | 3.23 |
| `hoist.test.ts` | 1 | 1.75 (1.71 to 1.91) | 0.17 (0.12 to 0.21) | 10.3
| 2.09 | 0.17 |
| `isolated-install.test.ts` | 85 | 6.24 (5.94 to 7.74) | 3.59 (3.15 to
3.95) | 1.7 | 7.67 | 4.32 |
| `isolated-relink.test.ts` | 6 | 2.29 (1.89 to 2.96) | 0.35 (0.30 to
0.47) | 6.5 | 2.72 | 0.48 |
| `migration/pnpm-lock-v9.test.ts` | 84 | 3.86 (3.64 to 4.85) | 1.54
(1.34 to 1.83) | 2.5 | 4.57 | 1.89 |
| `migration/pnpm-migration.test.ts` | 3 | 1.89 (1.72 to 2.16) | 0.18
(0.16 to 0.22) | 10.5 | 2.29 | 0.23 |
| `nested-overrides.test.ts` | 144 | 8.95 (8.20 to 10.21) | 5.92 (4.50
to 8.86) | 1.5 | 15.03 | 9.69 |
| `npmrc.test.ts` | 47 | 2.52 (2.32 to 2.68) | 0.58 (0.55 to 0.61) | 4.4
| 2.91 | 0.65 |
| `public-hoist-pattern.test.ts` | 14 | 2.53 (2.44 to 2.62) | 0.46 (0.44
to 0.48) | 5.5 | 3.01 | 0.60 |
| `update_interactive_formatting.test.ts` | 24 | 2.99 (2.79 to 3.28) |
0.70 (0.55 to 0.99) | 4.3 | 3.93 | 1.11 |
| **sum** | **2518** | **157.7** | **83.3** | **1.9** | **213.8** |
**112.5** |
Each round, the sum over the files where both sides exited with 0:
| round | files | before, wall | after, wall | before, CPU | after, CPU
|
|---|---|---|---|---|---|
| 1 | 29 | 146.4 | 71.2 | 184.7 | 95.8 |
| 2 | 30 | 140.9 | 68.0 | 188.4 | 98.6 |
| 3 | 31 | 165.4 | 84.1 | 217.1 | 115.2 |
| 4 | 29 | 158.3 | 80.0 | 202.1 | 106.5 |
| 5 | 29 | 150.3 | 88.1 | 209.3 | 114.6 |
Runs that are not in the tables:
- 6 of the 155 runs with verdaccio did not start it. The log has
`Verdaccio exited with code 2 and signal null`. Code 2 is the exit of
verdaccio when it cannot listen (`build/lib/bootstrap.js`). `start()`
waits for a message that does not come. Five runs ended at the hook
timeout of 90 s. `bun-install-registry.test.ts` waits at module scope,
where no timeout applies: I stopped it after 678 s.
- I started verdaccio on a port that was in use, to check: the same
line, and `start()` did not settle.
- 1 of the 155 runs of this PR had one failing test: see the next
section.
**CI**
Build 124221 is main at c6da4a4. Build 124229 is this PR on the same
commit. Builds 124209 and 124201 are main, one and four commits earlier,
with the same 31 files. Each number is the sum over the 31 files of the
duration that the runner logs for a file. I read the logs with the
parser of `scripts/update-test-durations.mjs`. Seconds.
| lane | main 124221 | main 124209 | main 124201 | this PR 124229 |
|---|---|---|---|---|
| debian 13 x64 | 222.6 | 131.4 | 126.7 | 51.5 |
| ubuntu 25.04 x64 | 126.1 | 126.0 | 126.4 | 39.1 |
| alpine 3.23 x64 | 203.8 | 172.8 | 156.9 | 119.8 |
| debian 13 aarch64 | 141.7 | 145.6 | 141.2 | 45.6 |
| Windows 2019 x64 | 149.6 | 166.2 | 171.6 | 109.9 |
| Windows 11 aarch64 | 245.8 | 243.4 | 264.1 | 182.8 |
| **sum of the six lanes above** | **1089.6** | **985.4** | **986.9** |
**548.7** |
| debian 13 x64 ASAN | no tests | no tests | no tests | 340.2 |
| macOS aarch64 | no tests | no tests | no tests | 53.1 |
| macOS x64 | no tests | no tests | no tests | 67.1 |
- The 222.6 s of build 124221 have one run of 90 s:
`isolated-install.test.ts` on shard 8. The log has `Verdaccio exited
with code 2 and signal null` and the hook timeout. The second attempt
passed.
- The main builds have no test jobs for ASAN and macOS.
- A build is one sample. Apart from the 90 s run, the three main builds
differ by up to 47 s on a lane (alpine).
- Not each file is faster in CI. On each lane, 1 to 6 of the 31 files
took longer than in each of the three main builds. The largest
differences are on alpine: `bun-install-registry.test.ts` took 37.3 s
against 27.9 to 29.2 s, and `bun-update.test.ts` took 7.2 s against 2.5
to 2.7 s. That is one sample, and I do not know the cause. Locally each
file is faster.
- The four test files of `test/packages/registry/` take 1.5 to 4.8 s on
a lane.
Import cost, CPU, the lowest of the runs. Measured before the rebase, on
a build of 367d939:
| | release | debug |
|---|---|---|
| `harness.ts` | 29.5 ms | 1378 ms |
| the registry | 21.5 ms | 1162 ms |
| `node:zlib` alone | 11.5 ms | 615 ms |
#### A test that depended on the order of two packuments
`isolated-install.test.ts`, `ranged peer dependency resolution is stable
across installs from bun.lock`. The root depends on
`normal-dep-and-dev-dep` (which has `no-deps@1.0.1`), on
`two-range-deps` (`no-deps@^1.0.0`) and on `peer-deps-fixed` (peer
`no-deps@^1.0.0`). The test needs 1.0.1 and 1.1.0 in the graph.
- bun resolves `^1.0.0` to 1.1.0 when the packument of `two-range-deps`
is there first. When the packument of `normal-dep-and-dev-dep` is there
first, 1.0.1 is in the graph and `^1.0.0` resolves to it.
- I delayed one packument by 40 ms, with 12 installs for each case. A
slow `two-range-deps` gave one version 12 times. A slow
`normal-dep-and-dev-dep` gave both versions 12 times. No delay gave both
7 times and one 5 times.
- On main with verdaccio the test passed 50 of 50 runs. With the new
registry it failed 54 of 100 runs alone, and 10 of 20 runs of the file.
It fails with the older bun build 367d939 too (15 of 40), so the
rebase did not bring it.
- CI did not show it, before and after the rebase. CI sets
`BUN_INSTALL_CACHE_DIR`, so the tests of a file share one manifest
cache. With that variable the file passed 10 of 10 local runs. Without
it each test has its own cache.
- My local runs before the rebase did not show it. They were on a host
with a load average of 400 to 900.
- The test has its own registry now. Its `intercept` answers for
`normal-dep-and-dev-dep` after bun asked for `no-deps`, which bun does
when it has the packument of `two-range-deps`. There is no wait for
time. 100 of 100 runs alone and 20 of 20 runs of the file pass.
- After that change: 5 passes over the 31 files, and 5 runs in a row of
each file. 310 file runs, 0 failures.
Other tests can depend on the order in the same way. `hoisting > peers >
it should hoist 1.0.1 when peer *` does: see the flaky tests below. The
cause is in `bun install`, not in the registry: one `package.json` gives
two different trees.
#### Other things I found
- Before the rebase, `test/bun.lock` on main was stale: `bun install
--lockfile-only` on an unchanged main dropped five nested `react`
entries, and I kept them by hand. The lockfile of main is current now.
The lockfile diff here is what bun writes: verdaccio and its
dependencies go, and `debug` hoists to 4.4.0.
- `manifest conditional requests > a changed etag returns 200 and the
new etag is cached` failed once on unchanged main and passed on the next
run. It uses its own mock server, not the registry. It is in
`test/flaky-tests.txt`.
- On my local debug build, `Bun.serve` adds `content-type:
application/octet-stream` to an answer that has no body: a 304, and a
401. Two release builds, one of 367d939 and one of 36cd151, do not.
I did not find the cause and I saw it on one local build only. The tests
here assert the exact headers on the `Response` of the registry, and on
the wire only the headers that the registry sets.
- `Bun.serve` sets `SO_REUSEPORT` when it gets `development: false`. The
type of `reusePort` says that the default is false.
- `bun install` gives another tree for the same `package.json` when the
packuments arrive in another order: see the section on the order of two
packuments.
- `bun run` and `bun test` use a whole core, and do not end, while a
top-level await waits for a promise that nothing settles. A file with
`await new Promise(() => {})` used 9.9 s of CPU in 10 s. node prints
`Warning: Detected unsettled top-level await` and exits with 13. The
loop is `wait_for_promise` in `src/jsc/event_loop.rs`. This is how
`bun-install-registry.test.ts` on main hangs when verdaccio does not
start.
#### Flaky tests in files that this PR edits
Two tests of migrated files passed on a retry in the earlier builds of
this PR. Main has both without this change. In build 121299, the last
one before the rebase, no file of this PR was in the flaky annotations.
Files outside this PR were.
- `bun-install-registry.test.ts`, `hoisting > peers > it should hoist
1.0.1 when peer *`, on Windows 11 aarch64, with `a-dep@1.0.9`. The same
test fails the same way on the same lane in the main builds
https://buildkite.com/bun/bun/builds/120426 and
https://buildkite.com/bun/bun/builds/120659. I could read 11 main
builds. After the rebase it passed on a retry on ubuntu 25.04 aarch64 in
build 124229, again with `a-dep@1.0.9`. The version that it gets depends
on the order of the packuments.
- `bun-lock.test.ts`, `peer no published version satisfies > declared by
a registry package`. It runs against its own mock server.
`test/flaky-tests.txt` lists it at 34 of 80 builds.
I cannot say that the rate of the first one is unchanged. On my machine
it failed 1 time in 150 runs with this registry, and 0 times in 29 runs
with verdaccio.
A third test failed in my runs, and not in the builds of this PR:
- `bun-install-registry.test.ts`, `npm manifest cache entries are only
reused for the package name they were saved for`: `failed to open
manifest file ... ENOENT`. It failed in 1 of 8 runs of the file. Alone,
it failed in 2 of 40 runs with this registry, and in 5 of 40 runs on
main with verdaccio. `bun install` removes a manifest file that is not
valid and saves the new one in a task of the thread pool
(`Serializer::save_async` in `src/install/npm.rs`). I found nothing that
waits for that task before the exit. The test reads the file after the
exit. `test/flaky-tests.txt` has `failed to open ...` for this file.
#### Reviews of the diff
My review of the diff raised 9 concerns. 8 were addressed in full: the
header of a publish, an error in a handler, the export of the old name,
`pack()`, the claims about npm, #33115, the flaky tests, and the time of
the tests in `cli.test.ts`. One is addressed in part: the review named
six follow-ups, and these Notes list the three that I can describe.
The reviews on GitHub raised 12 more. All are addressed:
- The URL of a registry names the host that it listens on. It was
`localhost` for each host.
- A checkout with the leftovers of verdaccio failed the publish tests:
see the section above.
- The ignore rules for the leftovers stay.
- `intercept` gets a copy of the request, so it can read the body of a
request that the registry answers.
- The web login test fails with the output of bun when bun exits before
it asks for the session. Before, it waited for the timeout.
- Each test of the package disposes its registry when an assertion
fails.
- `VerdaccioRegistry` is removed. My review asked to keep the export for
open PRs. The review on GitHub asked to remove it, and `REVIEW.md` says
the same.
- A request that the registry refused left a part of its change in the
package: a `PUT` to `/<name>/-rev/<rev>` with a tag that is not valid,
and a deprecation with a message that is not a string. The checks come
before the first change now.
- In a search, a qualifier that matched took away the miss of a word
before it. A package is found when each word matches.
- A storage that is not a directory gave a registry that answered 404
for every package. The constructor throws now, and `cli.ts` prints the
message. A read that failed does not stay as the state of the package.
- `cli.ts` ended with a stack trace for a `--user` that the registry
refuses, for an option that it does not know, and for a port that is in
use. One handler prints the message and the usage for each refusal now.
- `cli.ts` took an empty `--port` as port 0, and it took `0x50` and
`1e3`. The value must be digits now.
One more finding got no change: a scope directory that another process
replaces with a file while the registry reads it. Nothing writes into
the storage while a registry runs, and a check before the read has the
same window. The reviewer withdrew the finding.
#### Related open PRs
These change `VerdaccioRegistry` in `test/harness.ts`. This PR removes
that class, so git reports a conflict, and the problem each one
addresses is not there with the new registry:
- #36352: `stop()` does not end the process. The new `stop()` closes the
server.
- #38891: the random port and a verdaccio that exits early. The new
registry listens on port 0 in the process of the test.
- #40219: `createTestDir()` removes the users. The new registry keeps
them.
- #40766: run verdaccio under node in CI.
These edit the line of `hoist.test.ts` that imports `VerdaccioRegistry`.
Git reports a conflict on that line. The new line imports `TestRegistry`
from `"registry"`:
- #43878
- #38976
I looked at the 500 open PRs that changed last. 72 of them change a file
under `test/cli` or `test/regression`, the harness, or a test with
`install`, `publish` or `registry` in its path. I read the diff of each.
No PR other than the ones above adds or changes a line with
`VerdaccioRegistry`.
</details>
<!-- robobun:evidence:begin -->
---
**no test proof** · iteration 0 · platform-specific test(s) that do not
run on this machine, deferring to CI, which covers all platforms:
test/cli/update_interactive_formatting.test.ts,
test/cli/install/migration/migrate.test.ts,
test/cli/install/isolated-relink.test.ts,
test/cli/install/isolated-install.test.ts,
test/cli/install/frozen-lockfile-pruned.test.ts,
test/cli/install/bun-workspaces.test.ts,
test/cli/install/bun-publish.test.ts,
test/cli/install/bun-prune.test.ts, test/cli/install/bun-patch.test.ts,
test/cli/install/bun-lockb.test.ts, test/cli/install/bun-lock.test.ts,
test/cli/install/bun-install-registry.test.ts,
test/cli/install/bun-install-patch.test.ts,
test/cli/install/bun-install-native-binlink.test.ts,
test/cli/install/bun-install-lifecycle-scripts.test.ts,
test/cli/install/bun-add-filter.test.ts,
test/bundler/bundler_bytecode_portable.test.ts
<!-- robobun:evidence:end -->
---------
Co-authored-by: Dylan Conway <dylan.conway567@gmail.com>
This branch has not been deployed
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Problem
VerdaccioRegistry.createTestDir()(test/harness.ts) deleted the registry's htpasswd file and reset the harness's user map on every call. Verdaccio checks each authenticated request against that file, so acreateTestDir()call in one test logged out every other test that ran at the same time.createTestDir(). test(install): run bun-install-registry.test.ts concurrently and tighten its assertions #38504 works around it with a serialwhoamiblock.Fix
createTestDir()no longer touches htpasswd or the user map.start()still begins each file with a fresh htpasswd (and now an empty user map), andstop()still removes the file.generateUser()never fires. Users now accumulate in htpasswd for the life of one registry process, which is one test file.bun bd test test/cli/install/npmrc.test.ts test/cli/install/config-precedence.test.ts(91 pass) andbun bd test test/cli/install/bun-install-registry.test.ts(246 pass, 5 skip). These are the files that create verdaccio users. test: run bun-publish.test.ts concurrently and assert the exact requests and output #40198 is rebased on this change.Background
VerdaccioRegistryforks one verdaccio process per test file. Its users live intest/cli/install/registry/htpasswd.generateUser()creates a user through the registry's API and returns a token.authBunfig()wraps that token in abunfig.toml.no test proof · iteration 0 · no src or test change; test-proof not applicable